Inventory Unit Detail
2018 Cub Cadet PRO Z 148L EFI
$3,800.00
Key Features
New/Used Used
Usage463 Hours
Availability
In Stock
LocationMurray Home & Auto, Inc.
Stock #
UE1392
Condition
Excellent
Product Features
Description
Steering
- Lap Bar / Steering Wheel Control: High Performance & Speed Control
- Lap Bar / Steering Wheel Adjustment: 3/4 length padded bars w/tooless quick adjust dial
Chassis
- Frame: Fully welded, full-legnth 12ga. channel frame with 14ga. reinforcements
- Front Axle / Yolks: 2 in. x 3 in. solid steel and 3/8 in. thick steel with sealed ball bearing front yolks
- Rear Bumper: 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
- ROPS: 2 in.x2 in. Foldable 3 Position Low Profile Clearance
Electrical System
- Alternator: 15 amp regulated
- Battery Voltage: 230 cold crank amp
Operation
- Park Brake / Braking: Intergrated system in Lap Bars
- Front Tires: 13 in. x 6.5 in. - 6 in. (smooth)
- Rear Tires: 23 in. x 10.5 in. - 12 in. (Turf Master)
- PTO Clutch: Warner Clutch - 125 ft lb.
- Seat Type: High-back suspension with seat belt, adjustable arm rests and 6 in. seat travel
- Cruise Control: N/A
- Safety Systems: Operator presence
Mower Deck
- Spindle Construction: 5 in. sealed cast aluminum housing (maintenance-free)
- Trim-Side Wear Guard: 3/4 in. Thick UHMW-PE Replaceable Trim-side Wear Guard
- Deck Material: Fully welded 10ga. (.135 in.) steel deck shell with reinforcements totaling .560 in.
- Discharge Chute: High-density, impact-resistant rubber
- Top Reinforcement(s): 2ga. (.250 in.) top plate
- Blade-Tip Speed (Approx): 18,500 fpm
- Deck Height Adjustment: Hand Lever / 15 position / spring assist
- Side Construction: 5/16 in.(.313) steel on trim and discharge sides
- Bottom Reinforcement: 7ga. (.175 in.) steel
- Deck Blades: 3 high-lift Marbain® blades / 18,500 fpm (approx.)
- Leading Edge Reinforcement: 1/4 in. (.250 in.) steel
- Spindle Covers: Steel - Tooless Quick Release
- Cutting Height: 1 in. - 5 in.
- Deck Size/Type: 48 in. FABRICATED DECK
- Deck Style/Construction: Floating, fabricated 10ga. (.135") steel shell (e-coated)
- Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
General
- Cup Holder: Intergrated into Side Pod
- Hour Meter: Standard electronic
Warranty
- Warranty: 2-year limited commercial warranty (no hour limitations) or 4-year/500-hour limited residential warranty
Engine & Drive System
- Fuel Capacity: Twin tanks - 3.5 gallon ea. (7 gallon total) with oversized filler opening
- Ground Speed: 9.5mph fwd. / 4.5mph rev.
- Engine Type: Kohler Confidant EFI EZT-740
- Horsepower / CC's: 25hp - 747cc
- Transmission: 12cc Hydro-Gear® ZT 3400 with charge pumps
Dimensions
- Length / Width / Height with chute down and ROPS up: 80 in. L x 61 in. W x 70 in. H
- L / W / H with discharge chute UP and ROPs DOWN: 80 in. L x 49 in. W x 48 in. H
- Weight (approx): 970 lb.
Engine
| Horse Power | 25hp - 747cc |
| Engine Type | Kohler Confidant EFI EZT-740 |
General
| Transmission | 12cc Hydro-Gear® ZT 3400 with charge pumps |
| Fuel Capacity | Twin tanks - 3.5 gallon ea. (7 gallon total) with oversized filler opening |
Deck
| Deck Size | 48 in. FABRICATED DECK |
